Category Archives: Blog

You Need to Read These Wood Chipper Operation Tips

You Need to Read These Wood Chipper Operation Tips

Once you have invested in a wood chipper, and especially if you are doing it for the first time, the nest thing that you need to work on is how you operate the machine. There is a number of things that you need to consider to ensure that you are chipping the wood properly. In this post, we are going to look at some of the key things that wood chipper users need to adhere to ensure that they are doing it properly. Check out these wood chipper operation tips to ensure that you are doing things right.

Starting the Machine

Before you start the wood chipper, make sure that you have checked the content of the key areas and that chute, cutting chamber and feed intake. These areas must be empty and free of all types of debris. Otherwise, if you make a mistake of starting the machine with these parts with debris, there is a danger of getting injured as debris are discharged. You could also have challenges with starting the machine if the cutting chamber has some debris in it. That is why you must ensure that the machine is thoroughly cleaned after used.

Inspect the Material to be Chipped

The second thing that you need to consider while grinding wood with your wood chipper is inspecting the material to be used. These machines are designed to be used for the cutting of the wood material and not anything else. Therefore, you must ensure that the material to be chipped is free of rocks, bottles, cans, metals and other foreign objects that cause serious injuries when discharged or could damage the machine.

Avoid Buildup of Material to Be Chipped

One of the mistakes that people make feeding the machine with too much material. Some think that this would increase their productivity, but in a real sense, it will reduce the efficiency of the machine. The result will be reduced productivity. It is also important to note that when there is a buildup, there is likely to discharge which is dangerous. That is why it is important to ensure that you have wood material are feed in small bits to prevent accumulation.

Always Have Nozzle Attachment Put On

Having the nozzle on is one of the safety precautions that you need to consider. In some cases, it could be an optional hose attachment. However, you should never attempt to attach or change either of the attachment while the wood chipper is running.